Samsung DJ68-00079J Assembling The Vacuum Cleaner For Use, Attaching the Hose to the Canister

ASSEMBLING THE VACUUM CLEANER FOR USE

Attaching the Hose to the Canister

Slide the Hose Clamper into the Canister lnlet until it “clicks” into place.(Fig. A-A)

Assembling the Extension Wand

Slide the narrow end of one Extension Wand section into the other Wand Extension.(Fig. A- B)Depress the locking button with your thumb and continue sliding the Extensions together.Turn the Wands in opposite directions until the locking button snaps into the hole in the other Wand. Make sure the locking button snaps into place completely.

Attaching the Extension Wand to the

Hose

Slide the handle end of the Hose over the end of the Wand with a locking button.(Fig A-C) Turn the Hose and Wand in opposite directions until the locking button on the Wand snaps into the hole on the Hose. Make sure the locking button snaps into place completely.

Attaching the Power Brush

Slide the free end of the Extension Wand onto the Power Brush Wand until the locking button “clicks” into place.(Fig. B-A) Hold Power Brush Electrical Cord against the back of the Extension Wand.(Fig. B-B) Press Power Brush Cord into the grooves of the Cord Clips.(Fig. B-

C)Plug the Power Brush Cord into the Hose Electrical Outlet.(Fig. B-D)Your vacuum cleaner is ready for use.

EN-4