Samsung DJ68-00079J Vacuuming With The Power Brush, Maintenance Or Replacement Of The Filters

3)After removing the used dust bag, insert the cardboard bag collar of the new dust bag into the suction inlet all the way.

4)Press the dust cover down gently until the clamp relocks.

NOTE : Used dust bag can be sealed by remov- ing the film from the paper and sticking the latter over the suction opening.(ONLY PAPER BAG)

MAINTENANCE OR REPLACEMENT OF THE FILTERS

1) INLET-FILTER.

•Open the dust cover.

•After detaching the filter, wash it lightly with water, dry it in the shade, and then insert it in its original position.

•Close the dust cover.

2) OUTLET-FILTER.

•The outlet-filter which the air comes out from the vacu- um-cleaner.

•Open the dust cover, and then pull the hook upward located at the front of the grille filter.

•Remove and replace the exhausted outlet-filter.

•Close the grille filter, and then close the dust cover.

GRILLE-FILTER

OUTLET-

FILTER

INLET-

FILTER

VACUUMING WITH THE POWER BRUSH

1. Attaching the Power Brush

The hose must be plugged into the canister and the power brush must be plugged into the hose and extension wand (see page 3).

2. Vacuuming

• For best results, move the power brush slowly using short,overlap- ping strokes.

•For heavily soiled areas, repeat strokes in several directions.

•Turn height adjustment knob to match the surface being cleaned. (optional)

EN-7