SETUP FUNCTIONS (DVD)
TROUBLESHOOTING
5.5 Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
●With the unit in Stop mode, press the DISPLAY key. Select Parental Control using the / keys, then press the OK key.
•Use the OK key to select On, if you want to use a password.
•The Enter current password screen appears.
●About the Rating Level :
The Rating Level will work only when use Password is set to On. To unlock the player, use the OK key to select Off.
•Use the / keys to move Parental Level, then press the OK key.
•Select Rating Level using the / keys, then press the OK key.
-Kids : Select this to play only DVDs for children.
-2 to 7 : Select this to play DVDs for general audiences and children. Adult DVDs cannot be played.
-Adult : Select this to play only DVDs for adult.
●About the Change Password :
•Use the / keys to select the Change Password.
•Press the OK key.
The Change Password screen appears.
•Enter your new password.
•
Note : If you forget the password, contact your dealer or service provider.
Once you change password, please do not forget and keep well.
In some region, the digital terrestrial signal may be weak.
So you’d better use the antenna in which the booster was built, for watching the weak signal channels.
You can download and upgrade the system software of the receiver through a specific channel through a specific channel designated by the broadcaster. The Distributor will provide you with more information about that.
Problem | Possible cause | Solution of the problem |
|
|
|
No display LED on | Power cord | Power cord plug in correctly |
the front panel; | not plugged in correctly | Back switch in correctly |
No power supply |
|
|
|
|
|
No pictures on the screen | Receiver in Standby mode; | Set receiver to “On”; |
| Scart not connected tightly | Check connection and correct; |
| to video output of television; |
|
| incorrect channel or video | Check channel and video output and |
| output selected on television | correct (TV instruction manual) |
|
|
|
No sound | Audio cord connected | Check connection and correct; |
| incorrectly; |
|
| Loudness level = 0; | Increase loudness on television set; |
| Muting active | Press the MUTE key |
|
|
|
Remote Control does not | incorrect operation; | Point remote control |
operate directly |
| towards the Receiver. |
| Batteries dead or inserted | Replace batteries or insert correctly |
| incorrectly |
|
|
|
|
Poor picture quality | Signal strength too low | Check the signal strength in |
|
| the “Auto Scanning” menu, correct |
|
| alignment of your antenna |
|
|
|
Antenna cable not connected | Check connection and correct; | |
“Searching for signal” | or not tight; |
|
| incorrect position of the | Check position and correct, |
| antenna; | Check the signal strength in |
|
| the “Auto Scanning” menu |
|
|
|
Receiver not yet set | Scanning of in “Auto scanning” | |
“Channel data |
| or “Manual scanning” menu |
does not exist.” |
|
|
|
|
|
DISPOSAL
The device, packaging material (e.g. Styrofoam) and the batteries must never be disposed of with household refuse.
Please obtain appropriate information about the regulations in your community, and dispose of all refuse in accordance with regulations at the separate locations provided.
D T T | R E C E I V E R | / | D V D | P L A Y E R |
GB
