![](/images/new-backgrounds/1207218/20721837x1.webp)
2. Insert one end of the accessory hose (long drain hose) into hole (A).
3. Insert the other end (outlet) of the accessory hose to the drainage system in one of the following ways:
A
Over a wash basin:
A
B C
1. Make sure to place the end of the | Installation |
| |
accessory hose lower than 90 cm (*) |
|
from the bottom of dryer. |
|
2. To bend some point of the accessory |
|
hose, use the supplied plastic hose |
|
guide (B) and secure the guide to the |
|
wall with a hook or to the tap with a |
|
piece of string. Assemble the drain hose |
|
(A) and the hose guide (B) and fix them |
|
with the |
|
3. You can drain the condensed water by |
|
connecting the accessory hose (long |
|
drain hose) to the |
|
CAUTION |
|
Do not extend the drain hose. Water may |
|
leak from the connected area. Use a long |
|
drain hose. |
|
English 19