Samsung DVD-1080P9/XET manual Connecting to a TV with DVI Jack, Connecting to a TV with HDMI Jack

Connecting to a TV with DVI Jack

1

Using the HDMI-DVI cable , connect the HDMI OUT ter- minal on the rear of the DVD player to the DVI IN terminal of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the DVI signal from the DVD player appears on your TV screen.

Connecting to a TV with HDMI Jack

WHITE

RED

Audio Cable

WHITE

RED

HDMI-DVI cable

● CONNECTIONS

1

Using the HDMI-HDMIcable connect the HDMI OUT termi- nal on the rear of the DVD player to the HDMI IN terminal of your TV.

2

Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen.

HDMI VIDEO Specifications

HDMI cable

When you press the HDMI SEL. button, 480p, 576p, 720p, 1080p, 1080i are selected in order. The first press of the HDMI SEL. button brings up the current resolution.

The second press allows you to change the HDMI output resolution.

-Depending on your TV, certain HDMI output resolutions may not work.

-Please refer to the user's manual of your TV.

-If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.

-If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.

-If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-CEC). (See page 33).

-If your TV has an logo, then it will Supports the Anynet+ Function.

English _13