connections

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

4

Set the Video Output to I-SCANin the Display Setup menu. (See pages 29 to 31)

You can use the VIDEO SEL. button to change the Video Output mode. (See page 9)

Note

WHITE

 

BLUE GREEN

 

RED

 

RED

Audio

Component Cable

Cable

 

 

WHITE

 

RED

 

RED BLUE GREEN

Do not use the connection Scart and

Component Video (Y, Pb, Pr) simul-

taneously.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)

-The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals can vary depending on the TV set. Please refer to the user's manual of the TV.

-There is no Component video displayed when "Scart RGB" selected by pressing video select button on remote control.

10_ connections