connections

Connection to a TV (Progressive)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

RED BLUE GREEN

 

 

RED

WHITE

 

 

Audio Cable

 

WHITE

 

Component cable

RED

RED

BLUE GREEN

 

4

Set the Video Output to P-SCANin the Display Setup menu. (See pages 29-30)

To see the progressive video output,

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-Depending on your TV, the connection method may differ from the illustration above.

Note

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.

10_ connections

Page 10
Image 10
Samsung DVD-H1080/MEA manual Connection to a TV Progressive