Samsung DVD-H1080/MEA manual Setting Up the Hdmi, Setting Up Anynet+HDMI-CEC, 1080p 1920 x

changing setup menu

Setting Up the HDMI

This Setting is used when the unit is connected by HDMI to Display devices (TV, Projector, etc.).

1.Press the MENU button.

2.Press the  buttons to select HDMI Page, then press the † or ENTER button.

3.Press the  buttons to select HDMI, then press the ® or ENTER button.

-Auto : Auto resolution setting

-480p/576p : 720 x 480, 720 x 576

-720p : 1280 x 720

-1080i : 1920 x 1080

-- HDMI Page --
HDMI	Auto
Anynet +(HDMI-CEC)	On
Picture Quality
BD Wise	Off

4.Set the Anynet+(HDMI-CEC) to “On”on your DVD Player., then press the ® or ENTER button.

--HDMI Page --

HDMI	Auto
Anynet +(HDMI-CEC)	On On
Picture Quality	Off
BD Wise	Off

- 1080p : 1920 x 1080

-- HDMI Page --
HDMI	Auto	Auto
Anynet +(HDMI-CEC)	On	576p
Picture Quality		720p
		1080i
BD Wise	Off
		1080p

5.Set the Anynet+ function on your Samsung TV. (See your TV instruction manual for more information.).

•When you press Anynet+ button on the TV remote control, the OSD to the right will appear.

Note

-The resolutions available for HDMI output depend on the connected TV or projector. For details, see the user's manual of your TV or projector.

-When the resolution is changed during playback, it may take a few seconds for a normal image to appear.

-If you have HDMI connected, better picture quality will be provided when the output resolution is set to 720p, 1080i or 1080p.

Setting Up Anynet+(HDMI-CEC)

Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI Cable. (see pages 11-12) This is only available with SAMSUNG TVs that support Anynet+.

DVP

V
	iew TV		®
Select Device			®
Record			®
Menu on Device			®
Device Operation			®
Receiver		: Off	®
Setup			®
Move		ENTER
Exit

You can operate the DVD Player by using the TV remote

control. These are buttons that can be used to operate

the DVD Player: , , , , , ,

and buttons, buttons.

-Select Device : Use this option to select device which you want to connect to your TV.

-Menu on Device : Same as MENU button on the DVD Player remote control.

1.Press the MENU button.

2.Press the  buttons to select HDMI Page, then press the † or ENTER button.

3.Press the  buttons to select Anynet+(HDMI-CEC), then press the ® or ENTER button.

-Device Operation : Same as INFO button on the DVD Player remote control.

32_ changing setup menu