Samsung DVD-H1080W, DVD-H1080R, DVDH1080 Setting Up the display op- tions, ❶ TV Aspect

❶Dolby Digital Out

-PCM : Converts to PCM(2CH) audio.

-Bit stream : Outputs Dolby Digital via digital output. Select Bit stream when connecting to a

Dolby Digital Decoder.

❷MPEG2 Digital Output

-PCM : Converts to PCM (2CH) audio.

-Bit stream : Converts to MPEG-2 Digital Bit stream (5.1CH). Select Bit stream when using the Digital Audio Output.

Note

-When playing discs that have MPEG Audio in

bit stream selection, the coaxial may not have any audio output. This depends on the AV receiver.

❸Dynamic Compression

-On : To select dynamic compression. This is useful for watching movies late at night, as it balances the loud and quiet portions of a disc.

-Off : To select the standard range.

❹PCM Down Sampling

-On : Select this when the Amplifier connected to the player is not 96KHz compatible.

In this case, the 96KHz signals will be down converted to 48KHZ.

-Off : Select this when the Amplifier is connected to the player if it is 96KHz compatible. In this case, all signals will be output without any changes.

❺Power music on

This menu is used to activate or deactivate the opening sound when you turn on the DVD player.

-On : To turn On Start up music.

-Off : To turn Off Start up music.

Note

-Even when PCM Down sampling is Off.

-Some discs will only output down sampled audio through the digital outputs.

-To make the setup menu disappear, press the MENU button.

HDMI

-If your TV is not compatible with compressed multi channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

-If your TV is not compatible with LPCM sampling rates over 48k Hz, you should set PCM Down sampling to on.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting Up the display op- tions

Display options enable you to set various video functions of the player.

1.Press the MENU button.

2.Press the √/® buttons to select Display Setup Page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

–To make the setup menu disappear, press the MENU but ton.

--Display Setup Page --

TV Aspect	Wide
Screen Message	On
Video Output	I-Scan
Black Level	Off
TV System	PAL
DivX VOD

❶ TV Aspect

Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio).

-4:3 Pan&Scan : Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

-4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

-16:9 Wide : You can view the full 16:9 picture on your wide screen TV.

-- Display Setup Page --

TV Aspect	Wide	4:3 Pan&Scan
Screen Message	On	4:3 Letter Box
		16:9 Wide
Video Output	I-Scan
Black Level	Off
TV System	PAL
DivX VOD

❷Screen Messages

Use to turn on-screen messages On or Off.

c ● hanging setup menu

English _29