Enter your user name and password, and then click to enter the Configuration Manager. Use the following defaults the first time you log into this interface:

Default User Name:

admin

Default Password:

(no password)

You can change the password at any time (see section

5.3.1System Commands).

3.To setup a new IP address, click “System”, then “IP Setup” (see Figure 7). Fill in the IP address, network mask and default gateway,

then click .

4.If your new address is different from the default, the browser can not update the switch status window or retrieve any page. This is normal. You have to retype the new IP address in the address/location box, and press <Enter>. The WEB link returns.

5.To enable authentication for Web access, click “Administration” on the menu list, then select “Enabled” to start the protection.

A login window appears immediately after you click . See the figures on the next page.

Figure 7. IP Setup

26

Page 26
Image 26
Asus GigaX manual IP Setup