4.7.3Trap Setting
By setting trap destination IP addresses and community names, you can enable SNMP trap function to send trap packets in different versions (v1 or
v2c). Click 
to save the configuration permanently or 
to refresh the page.
Figure 34. Trap Setting
4.7.4VACM Group
VACM
Group Name: enter the security group name.
Read View Name: enter the Read View Name that the Group belongs. The related SNMP messages are Get, GetNext, GetBulk.
Write View Name: enter the Write View Name that the Group belongs. The related SNMP message is Set.
Notify View Name: enter the Notify View Name that the Group belongs. The related SNMP messages are Trap, Report.
Security Model: enter the Security Model Name that the Group belongs. Any is suitable for v1, v2, v3. USM is SNMPv3 related.
60
