Asus GigaX manual Show Trunk, CLI command l2 trunk show trunk id Create Trunk

GigaX Series L3 Managed Switch User Guide

Port <port number> Path Cost (1..200000000):[old port Path Cost] <new port Path Cost>

Port <port number> EdgePort (yes/no):[old port EdgePort] <new port EdgePort >

Port <port number> Point-to-Point (yes/no/auto):[old port Point-to-Point] <new port Point-to-Point >

[Reload]

Restores the previous saved settings from configuration file.

CLI command : l2 stp retrieve

CLI command : l2 stp bridge retrieve

CLI command : l2 stp port retrieve

[Show Trunk]

Displays a specific trunk group settings. User can create a new trunk group by specify a unique trunk ID, a trunk name description, the port selection criterion (rtag), LACP mode (enabled or disable), and its trunk group member ports.

CLI command : l2 trunk show <trunk id>

[Create Trunk]

Creates a new trunk group by giving trunk ID, rtag, name, LACP mode and port numbers. The “rtag” is the packet distribution algorithm for the trunk group.

Rtag values and corresponding meanings:

1:select port by source MAC

2:select port by destination MAC

3:select port by source and destination MAC

4:select port by source IP

5:select port by destination IP

89