Connection to a TV (S-Video)

-Connecting to your TV using an S-Video cable.

-You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals aredelivered through the audio output.)

1

Using an S-Video cable (not included), connect the S- VIDEO OUT terminal on the rear of the DVD player to the S-VIDEO IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the S-Video signal from the DVD player appears on your TV screen.

RED

WHITE

 

 

Audio Cable

S-Video Cable

 

 

(not included)

RED

WHITE

 

4

Set the Video Output to PROGRESSIVE OUT OFF in the

Display Setup menu. (See pages 28 to 29)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 9)

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)

-The number and position of terminals can vary depending on the TV set. Please refer to the user's manual of the TV.

-Please do not connect S-Video and Component Video (Y, Pb, Pr) output simultaneously, as they may interfere and degrade both video output quality.

-If you set the HDMI output resolution 720p or 1080i, Video/S-Video and component output cannot be used.

10