Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using component video cables (not included), connect the

COMPONENT VIDEO OUT terminal on the rear of the

DVD player to the COMPONENT IN terminal of TV.

2

 

 

RED

BLUE GREEN

Using the audio cables, connect the AUDIO (red and

 

 

 

 

 

 

white) OUT terminals on the rear of the DVD player to the

 

 

 

 

AUDIO (red and white) IN terminals of TV. Turn on the

 

 

 

 

DVD player and TV.

 

 

 

 

3

 

RED

WHITE

Press the input selector on your TV remote control until the

 

Audio Cable

 

 

Component signal from the DVD player appears on the TV

 

 

 

(not included)

 

RED

WHITE

 

Component cable

screen.

 

RED

BLUE

GREEN

 

 

 

 

4

Set the Video Output to PROGRESSIVE OUT OFF in the

Display Setup menu. (See pages 28 to 29)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 9)

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)

-The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals can vary depending on the TV set. Please refer to the user's manual of the TV.

-If you set the HDMI output resolution 720p or 1080i, Video/S-Video and component output cannot be used.

English

11