Connection to a TV (Interlace)
-Connecting to your TV using Component video cables.
-You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)
1
Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.
2
Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
RED BLUE GREEN
English
3
Press the input selector on your TV remote control until the
RED WHITE
Audio Cable
Component signal from the DVD player appears on the TV
RED
WHITE
Component cable (not included)
screen.
4
Set the Video Output to
You can use the VIDEO SEL. button to change the Video Output mode. (See page 9)
Note
RED BLUE GREEN
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)
-The component terminal of TV can be marked by
-If you set the HDMI output resolution 720p or 1080i,
11