Samsung DVD-HR720 Setting up Progressive scan, During playback, the message This

Setting up the

Progressive scan

If your TV supports Progressive Scan, press the P.SCAN button on the front of the HDD & DVD RECORDER. To view ‘Progressive scan mode’, first connect the component cable.

(See page 22)

Be sure the Component cables are connected properly.

1	With the unit in Stop mode, press the P.SCAN		button
	on the front of the HDD & DVD RECORDER.
	The message “Press [Yes] to confirm Progressive
	scan mode. Otherwise, press [No].” will appear.
	Press the œ √ buttons to select Yes , and then
	press the ENTER	button.

Press [Yes] to confirm Progressive scan mode.

Otherwise, press [No].

Yes No

2	The message “Please, set your TV to Progressive
	input. To deactivate, press [STOP] key.” will
	appear. Press the ENTER	button.

3	The message “Video Output Mode Progressive
	Scan” will appear. The video will now be

Progressive Scan.

Video Output Mode

Progressive Scan

	■	If the P.SCAN	button on the HDD & DVD
		RECORDER’s front panel is pressed		System
NOTE
		during playback, the message “This
		function is possible only on stop mode”
		appears on the screen.		Setup
	■	Progressive setting is only available when

the HDD & DVD RECORDER is in stop mode.

Please, set your TV to Progressive input,

To deactivate, press [STOP] key.

OK

English - 45