Samsung DVD-HR720 instruction manual Load, Sp Lp Ep Xp

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

Connect the DV output jack of your camcorder to the

1 DV input jack on the front of your HDD & DVD RECORDER using a DV cable.

2	Press the HDD		or DVD	button.
	If you select DVD, press the OPEN/CLOSE				button and
	place a recordable disc on the disc tray. Press the
	OPEN/CLOSE		button to close the disc tray. Wait until
	LOAD	disappears from the front panel display.
3	Press the REC MODE			button repeatedly to select
	the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

Record Mode SP 031:39

4	Press the INPUT button to select DV .
	If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the screen.

DV

The DV device is connected.

MOVE SELECT RETURN

5 Select the Play (√) icon on the upper part of the screen to playback the camcorder and find the starting position to copy.

You can press the PLAY ( )button of the remote control to play the camcorder.

To start recording, use the œ √ buttons to select
6Record ( ● ) icon in the top side of the screen, then
press the ENTER	button.

You can press the REC button of the remote control to start recording. To display playback related icons on the screen, press any direction button on the remote control.

- To stop recording -

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RAM/-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed

Recording

English - 83