Samsung DVD-HR735/XEN manual Plug & Auto Setup, Select Country using the …† œ √ buttons to

Plug & Auto Setup

Your HDD & DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes.

Your HDD & DVD RECORDER will then be ready for use.

	1	Connect the RF cable as indicated on page 19.
		(Connecting Your HDD & DVD RECORDER to the
		TV Using the RF Cable and scart cable.)
		To use HDMI cable, make the Audio/Video
		connection before plugging in the power cord or
		after finishing the “Plug & Auto Setup.”
Setup		Do not connect the HDMI cable while the
		“Plug & Auto Setup” is progressing.
ystemS
	2	Plug the HDD & DVD RECORDER into the mains.
		“AUTO” in the front panel display flickers.

3 Press a number button to select the language.

4 Press the OK button to start the auto setup.

Auto setup will be started.

Yes No

Select “Country” using the …† œ √ buttons to
5 select your country.
		Country Selection
		NL	S	PL
	A
	B	I	CH	CZ
	DK	N	TR	Others
	FIN	P	GR
	D	E	HU

• Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ (Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

•The HDD & DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected.

6 Auto channel scan will be started.

Auto Setup

Please wait.

68%

•The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found.

7 After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. If you do not want to do auto clock setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

28 - English