HDD & DVD RECORDER |
|
|
| Video | |||
HDD |
|
|
|
|
|
|
|
|
| TV Aspect |
|
| : 4:3 Letter Box | ||
| Library |
|
| ||||
Timer Record | 3D Noise Reduction | : Off |
| ||||
HDMI Resolution | : 576P |
| |||||
Disc Manager | Video Output |
| Component |
|
| ||
| Setup |
|
| RGB |
|
|
|
|
|
|
|
|
|
|
|
mMOVE | sSELECT | rRETURN |
| eEXIT |
Video Output
You can enjoy high quality image through RGB or Component video connections. RGB video output is available connecting scart jack(AV1) and component video output is available connecting component(Y, PB, PR) jack. Only one of these signals can be selected at one time.
•Component
•RGB
In Component mode, you can set video output to Progressive (P.SCAN) or Interlace, see pages 37 to 38.
When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.
Available Video Output Jack
| Setting mode | Component mode | RGB Mode | ||
Output jack | P.SCAN off mode (Interlace mode) | P.SCAN on mode | |||
| |||||
Component Output | |||||
(Y, PB, PR) | (TV in progressive mode) | ||||
|
| ||||
AV1 | R, G, B | ||||
Scart | Composite | ||||
|
|
|
|
| |
Composite Video out | |||||
M When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.
Progressive scanIf your TV supports Progressive Scan, press the P.SCAN button on the front of the HDD & DVD RECORDER.
To view ‘Progressive scan mode’, first connect the component cable. (See page 21)
Be sure the Component cables are connected properly.
Setup ystemS
Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].
Yes No
◆Setting up the Progressive scan
1.With the unit in Stop mode, press the P.SCAN button on the front of the HDD & DVD RECORDER.
The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear.
2.Press the ◄► buttons to select Yes, and then press the OK button.
3.Set your TV to Progressive input (using the TV remote control.)
English - 37