SE T U P
Setup
Rear Panel12
1.DIGITAL AUDIO OUT JACKS-Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
-Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.
2.COMPONENT VIDEO OUT JACKS-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.
-If Component(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.
-If Component(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.
3.AUDIO OUT JACKS 4.VIDEO OUT JACK-Use a video cable to connect to the Video input jack on your television.-The Video Output in Setup Menu must be set to S-Video.5.S-VIDEO OUT JACK-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.
-The Video Output in Setup Menu must be set to S-Video.
Connect to the Audio input jacks of your television or audio/video receiver.Note-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
-If Component (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.
-See pages 50 ~ 51 to get more information on how to use the setup menu. ENG-9