Samsung DVD-P350K/AFR manual Choosing a Connection, Connections, Before Connecting the DVD Player

C h a p t e r 2

CO N N E C T I O N S

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connection to a TV (Video)

1

Using video/audio cables, connect the VIDEO (yellow)/AUDIO

(red and white) OUT terminals on the rear of the DVD player to

the VIDEO (yellow)/AUDIO (red and white) IN terminals of your

TV.

2

Turn on the DVD player and TV.

RED	WHITE	YELLOW
	Audio Cable	Video Cable
RED	WHITE	YELLOW

3

Press the input selector on your TV remote control until the

Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

-The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

Connections

ENG-11