Samsung AK68-01770G, DVD-P390 user manual Connecting to a TV Interlace, English

Connecting to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy excelllent quality and accurate color reproduction images. Component video

separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using Component video cables, connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV.

Turn on your DVD player and TV.

3

Set the Video Output to I-SCAN(480i) in the Display Setup menu. (See pages 50 to 51)

WHITE

RED

Audio Cable

BLUE GREEN

RED

Component cable

● CONNECTIONS

RED WHITE RED BLUE GREEN

4

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

-The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of the jacks may vary depending on the TV set. Please refer to the user's manual of your TV.

English _13