connections
Connecting to a TV (Video)
1
Using Video/Audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.
2
Turn on your DVD player and TV.
3
Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.
Note
WHITE |
|
|
RED |
|
|
|
| YELLOW |
| Audio | Video |
| Cable | |
| Cable | |
|
| |
RED | WHITE | YELLOW |
-Noise may be generated if the audio cable placed too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.
-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.