Samsung DVD-P560/XEL manual Rear Panel

Rear Panel

2 6

English

1 2 3 4 5

1.SCART JACK

-Connect to a TV scart input jack.

2.DIGITAL AUDIO OUT JACKS

-Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

3.AUDIO OUT JACKS

Connect to the Audio input jacks of your televi- sion or audio/video receiver.

4.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

-The Video Output in Setup Menu must be set to Component(I-SCAN) or S-VIDEO.

5.S-VIDEO OUT JACK

-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

-The Video Output in Setup Menu must be set to COMPOSITE/S-VIDEO.

6.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks pro- vide PR, PB and Y video.

-If Component(P-SCAN) Video Output is select- ed in Setup Menu, progressive scan mode will work.

-If Component(I-SCAN) Video Output is select- ed in Setup Menu, interlaced scan mode will work.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-If Component (P-SCAN) Video Output is selected in Setup Menu, S-Video will not work.

-See pages 27 ~ 28 to get more information on how to use the setup menu.

7