Samsung DVD-R119 instruction manual Setting up the Audio Options, Digital Output

Setting up the Audio Options

You can connect the DVD RECORDER to an external amp or Home Theatre.

Allow you to setup the Audio device and sound status depending on the audio system in use.

	With the unit in Stop mode/No Disc mode,
1 press the MENU button.
				Programme
		No Disc
		Programme	Timer Record		√
		Setup
		MOVE	SELECT	RETURN	EXIT
	Press the …† buttons to select Setup, then press
2 the OK or √ button.
					Setup
		No Disc
		Programme	System		√
		Setup	Clock Set		√
			Language		√
			Audio		√
			Video		√
			Parental Control		√
			Install		√
		MOVE	SELECT	RETURN	EXIT

Press the …† buttons to select Audio, then
3 press the OK or √ button.
Audio setup menu will be displayed.
			Setup
	No Disc
	Programme	Digital Output	: PCM	√
	Setup	DTS	: Off	√
		Dynamic Compression : On		√
	MOVE	SELECT	RETURN	EXIT

		Press the …† buttons to select the desired audio
4 option, then press the OK or √ button.
							Setup
				No Disc
				Programme	Digital Output	PCM
				Setup	DTS	Bitstream
					Dynamic Compression : On		√
				MOVE	SELECT	RETURN	EXIT
		Press the …† buttons to select the desired item,
5 then press the OK button.
								S
								ystem
	NOTE		to the previous menu.
		■	Press the RETURN or œ button to return
			Press the MENU button to exit the menu.					Setup

Digital Output

•PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-

2)signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo.

•Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier have Dolby Digital (or MPEG-2) Decoder.

■Digital output setting is equally applied to

both Dolby Digital and MPEG-2 audio.

NOTE LPCM sound track is always outputted as PCM. It has no relation with Digital Output setting.

■Be sure to select the correct Digital Output or you will hear no sound or loud noise.

English - 33