Samsung DVD-R119 Or not will be asked first. See, According to the connection you made, Sequence

Recording from external equipment you are watching

Before you start

Check that the disc has enough available space for the recording. Adjust the recording mode.

1	Press the OPEN/CLOSE button and place a recordable
	disc on the disc tray.
2	Press the OPEN/CLOSE button to close the disc tray.
	Wait until LOAD disappears from the front panel display.
	If an unused DVD-RW disc is used, whether to initialize
	or not will be asked first. (See page 67)
	Press the INPUT button to select the input source
3 according to the connection you made.
	The front panel display changes in the following
	sequence:
	➞ PR Number ➞ AV1 ➞ AV2 ➞ AV3
	Press the REC MODE button repeatedly, (or press
4 the REC MODE button, then press the …† buttons)
ecordingR	to select the recording speed (quality).
	➞ SP ➞ LP ➞ EP ➞ XP

Record Mode SP 031:39

Press the REC button.

5 Information concerning the external input mode is displayed on the screen, then recording begins. ‘REC’ is displayed on the front panel.

- To pause recording -

•Press the PLAY/PAUSE ( ) button to pause a recording in progress.

•Press the PLAY/PAUSE ( ) button again during pause to resume recording.

•You can switch channels by pressing the

PROG ( ) buttons while recording pauses.

-To stop recording -

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

70 - English