C O N N E C T I O N S

Connecting a Power Cord & Auto Setup

1

Your DVD-VCR's power cord should be plugged into a standard 120V/60Hz wall outlet. Avoid pressing any buttons on the remote control or on the unit during Auto Setup. While your DVD-VCR is running Auto Setup, “Auto” will blink. When Auto Setup is complete, the current time will be displayed on the front panel. If Auto Setup fails to locate a channel to set the clock, you should set the clock manually. (See pages 24 to 25.)

You must have the antenna/cable connected for the Auto Clock to set

2

Turn on the power by pressing the POWER

button on the remote control or on the front panel.

3

Turn on your TV by pressing the POWER button on the TV remote control.

4

Press the input selector on your TV remote until the signal from the DVD-VCR appears.

ENG-21

Page 21
Image 21
Samsung DVD-V8650 instruction manual Connecting a Power Cord & Auto Setup, ENG-21