C O N N E C T I O N S

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio out or line out audio).

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD-VCR to the COMPONENT IN terminal of your TV.

2

Using the audio cables, connect from the AUDIO OUT or LINE OUT AUDIO (red and white) terminals on the rear of the DVD-VCR to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD-VCR and TV.

3

With the unit in stop mode, set the Alt video output to Component: Interlace in the Display Setup menu (see pages 60~61) or press the P.SCAN button on the front panel until Interlace is output.

White

Red

Blue

 

 

Green

Red

 

 

 

Audio Cable

Component Cable

 

 

 

 

(not included)

Red White Red

Blue Green

4

Press the input selector on your TV remote control until the Component signal from the DVD- VCR appears on the TV screen.

Notes

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)

-The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

-The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you must have the Video Out (Yellow) or RF Out jack connected.

-You can hear the sound from LINE OUT AUDIO or AUDIO OUT (red and white) terminals for Component connection. VCR audio only outputs through the Line Out Audio jacks (Red,White).

ENG-17

Page 17
Image 17
Samsung DVD-V8650 instruction manual Connection to a TV Interlace, ENG-17