Samsung DVD-VR320/EUR manual Connecting DVD, Cable

Connecting DVD	Connecting the SCART
Recorder & VCR to the	Cable
TV using the RF Cable

Note

Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

❚Case 1 : Connecting DVD Recorder & VCR to the TV using the SCART Cable

Connections

	Remove the aerial or network input cable from the
1 television.
2	Connect this cable to the 75Ω aerial jack marked
		on the rear of your DVD Recorder & VCR.

You can connect your DVD Recorder & VCR to the television using the SCART cable if the appropriate input is available on the television. You thus:

•Obtain better quality sound and pictures

•Simplify the setting up procedure of your DVD Recorder & VCR

Plug the RF Cable supplied into the	jack on
3 your DVD Recorder & VCR.

4 Plug the other end of the RF Cable into the con-

nector previously used for the aerial on the television.

Note

Regardless of the type of connection chosen, you must always connect the RF Cable. Otherwise, no picture will be visible on the screen when the DVD Recorder & VCR is switched off.

Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables.

To obtain better quality pictures and sound

on your television, you can also connect your Note DVD Recorder & VCR to the television via

the SCART cable if your television equipped with type of connection.

1		Connect the Aerial Cable.
	2	Connect one end of the SCART cable to the AV1
		(TV) jack on the rear of the DVD Recorder & VCR.

3 Plug the other end into the appropriate connector on the television.

16 - English