Samsung DVD-VR320/EUR manual Setting up Progressive scan, Component mode, Scan will appear

In Component mode, you can set video output to Progressive (P.SCAN) or Interlace, see page 38~39.

Available video output jacks are as follow.

2 The message “Please, set your TV to Progressive input. To deactivate, press [STOP] key.” will appear. Press the OK button.

Available Video Output Jack

Output jack	Setting mode		Component mode		RGB Mode
			P.SCAN off mode (Interlace mode)	P.SCAN on mode
Component Output			O	O	X
(Y, Pb, Pr)				(TV in progressive mode)
AV1 Scart		R, G, B	X	X	O
		Composite	O	X	X
AV2 Scart		Composite	O	X	O
Composite Video out			O	X	O
S-Video out			O	X	O

Setup
ystemS
		Setting up the
		Progressive scan
		If your TV supports Progressive Scan, press the
		P.SCAN button on the front of the DVD Recorder &
		VCR to enjoy.
		With the unit in Stop mode, press the P.SCAN
	1 button on the front of the DVD Recorder & VCR.
		The message “Press, [Yes] to confirm Progressive
		scan mode. Otherwise, press [No].” will appear.
		Press the œ √ buttons to select Yes, and then
		press the OK button.
			Press [Yes] to confirm Progressive scan mode.
			Otherwise, press [No].
				Yes	No

Please, set your TV to Progressive input.

To deactivate, press [STOP] key.

OK

3	The message “Video Output Mode Progressive
	Scan” will appear.

Video Output Mode

Progressive Scan

■ Progressive setting is only available when

	the Video Out is set to Component.
Note
	(See page 37)

■If the P.SCAN button on the DVD Recorder & VCR’s front panel is pressed during playback, the message

“This function is only possible in stop mode” appears on the screen.

■Progressive setting is only available when the DVD Recorder & VCR is in stop mode.

38 - English