Samsung DVD-VR329 Setting Up the Audio Options, Digital Output, Dynamic Compression

Setting Up the Audio Options

Allows you to setup the audio device and sound status settings depending on the audio system in use.

	With the unit in Stop mode/No Disc mode, press
1 the MENU button.
	Press the …† buttons to select Setup, then press
2 the ENTER or √ button.
		DVD-Recorder			Setup
		No Disc
		Timer Rec.	System		√
		Setup	Clock Set		√
			Channel Set		√
			Language		√
			Audio		√
			Video		√
			Parental Control		√
		MOVE	ENTER	RETURN	EXIT

Press the …† buttons to select Audio, then press
3 the ENTER or √ button.
Audio setup menu will be displayed.
	DVD-Recorder			Audio
	No Disc
	Timer Rec.	Digital Output	: PCM	√
	Setup	DTS	: Off	√
		Dynamic Compressiom : On		√
	MOVE	ENTER	RETURN	EXIT

		Press the …† buttons to select the desired audio
4 option, then press the ENTER or √ button.
		Press the …† buttons to select the desired item,
5 then press the ENTER or √ button.
		■ Press the RETURN or œ button to return to the
		previous menu.
	Note
		Press the MENU button to exit the menu.

Digital Output

1.PCM : Converts to PCM(2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs.

2.Bitstream : Converts to Dolby Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Outputs.

	Be sure to select the correct Digital Output or
Note	no audio will be heard.

DTS

1.Off : Doesn’t output digital signal.

2.On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.

	When DTS soundtrack is played, sound is not
Note	output from Analog Audio Output.

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.On : When the Movie soundtracks are played at low volume or from small speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

2.Off : You can enjoy the movie with the standard Dynamic Range.

System Setup

English - 35