Samsung DVD-VR329 Channel Add/Delete, RF Output Channel, Press the Enter or √ button

4	Press the …† buttons to select Auto Channel
	Memory, then press the ENTER or √ button.

Auto Channel Memory

Total channel numbers : 02/125 Saved channel :

1%

Stop

•The DVD Recorder & VCR will automatically search for all available channels in the selected tuner band. This procedure may take a few minutes to complete.

•When finished, the lowest channel will be dis- played.

•If you want to stop or cancel scanning, press the ENTER button. Then select ‘YES’.

Channel Add/Delete

Use this feature if Auto Channel Memory missed a channel that you would like to add or if you wish to remove a channel.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the ENTER or √ button.

4	Press the …† buttons to select Channel
	Add/Delete, then press the ENTER or √ button.
		DVD-Recorder		Channel Add/Delete
		No Disc
		Timer Rec.
		Setup	Select channel :		1
			Add	Delete
		NUMBER	ENTER	RETURN	EXIT
	Press the …† or number buttons to select the
5 channels you want to add or delete on the Select
	channel screen. Then, press the ENTER button.
	• Using CH/TRK ( /			) buttons for channel selection
	allows the user to add/delete one channel at a time.
	• Using …† buttons for channel selection jumps to					System
	the next channel memorized in Auto Channel
	Memory.
						Setup
6 then press the ENTER button.
	Press the œ √ buttons to select Add or Delete,
		DVD-Recorder		Channel Add/Delete
		No Disc
		Timer Rec.
		Setup	Select channel :		11
			Channel is added.
			Add	Delete
		NUMBER	ENTER	RETURN	EXIT

RF Output Channel

Press the …† buttons to select Channel Set, then
3 press the ENTER or √ button.
	DVD-Recorder		Channel Set
	No Disc
	Timer Rec.	Antenna/Cable TV : Antenna		√
	Setup	Auto Channel Memory		√
		Channel Add/Delete		√
		RF Output Channel : CH3		√
	MOVE	ENTER	RETURN	EXIT

When you connect the DVD Recorder & VCR to your TV with the RF Antenna Cable, follow the steps below to set the RF Output Channel.

1 With the unit in Stop mode/No Disc mode, press the MENU button.

2 Press the …† buttons to select Setup, then press the ENTER or √ button.

English - 33