Samsung DVD-VR329 instruction manual Install Batteries in the Remote Control

Step 5 : Connecting the Power Cord

After all connections are complete, plug the power cord in the wall outlet.

“Auto” appears in the front panel display. This means that the current time is being set automati- cally through the antenna under connection(Auto Program). The setup may take several minutes.

When the DVD Recorder & VCR operates normally, the current time is automatically set and displayed in the front panel display.

Step 6 : Preparing the Remote Control

Install Batteries in the Remote Control

•Open the battery cover on the back of the remote control.

•Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the battery cover.

If the remote control does not operate properly:

•Check the polarity + - of the batteries (Dry-Cell)

•Check if the batteries are drained.

•Check if the remote sensor is blocked by obstacles.

•Check if there is any fluorescent lighting nearby.

Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

Connections

English - 27