PROBLEM |
| POSSIBLE CAUSE | WHAT TO DO |
Dishwasher leaks | • | Overfill dispenser or rinse | • Be careful not to overfill the rinse aid |
|
| aid spills. | dispenser. |
|
|
| Spilled rinse aid could cause overusing |
|
|
| and lead to overflowing. |
|
|
| Wipe away any spills with a damp cloth. |
|
|
|
|
| • | Dishwasher isn’t level. | • Make sure the dishwasher is level. |
Buttons are not | • | Door is open. | • When door is opened, buttons are not |
working on power on |
|
| working except Power button. Close the |
state |
|
| door and press the button. |
|
|
| |
| • Child lock function is | • When selected Child lock function, | |
|
| selected. | buttons are not responded. To unlock |
|
|
| this function, hold down both the 3 in |
|
|
| 1 and Delay start buttons for three (3) |
|
|
| seconds. |
|
|
| Also, Child lock function is released when |
|
|
| power cord is reconnected. |
|
|
|
|
The result of washing performance may be caused by a power supply issue. Try another program before contacting for service.
ERROR CODES
If an error occurs an error code may be displayed to inform you:
| CODES | MEANING |
| POSSIBLE CAUSES |
| Water supply error | 1. | Faucets is closed or water intake |
| • Longer water inlet time |
| is restricted. |
|
| 2. | Water pressure is too low. |
4E |
| 3. | Water inlet valve or |
|
| not working. | |
|
|
| |
|
| 4. | |
|
|
| pressure SW detect high level. so, |
|
|
| can not fill any more water.) |
| Heater error | 1. | Heater or temperature sensor is |
| • Longer heating time, but not |
| breakdown. |
HE | reaching required temperature. | 2. | Water in Tub is too low on Heater |
|
| operation step. | |
|
|
| |
|
| 3. | Low level Protect device is not |
|
|
| working. |
| Leakage error | Overfilled into the dishwasher. | |
LE | • Leakage sensor detect any | Leak from somewhere to bottom tray. | |
| leakage water |
|
|
tE | Failure of temperature sensor | Short/Open circuit or break of | |
| temperature sensor. | ||
|
| ||
WARNING: If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an over fill or small leak, the water should be removed before restarting the dishwasher.
TROUBLESHOOTING 07
Troubleshooting _29
|
| ||
|
|