Installing your dishwasher
CONNECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run into the sink, making sure to avoid bending or crimping it. The top of the hose must be at a height between 40 and 100 cm. The free end of the hose must not be immersed in water to avoid the back flow of it.
NOTE
The top of the hose must be at a height between 40 and 100cm.
The free end of the hose must not be immersed in water.
Drain pipe 
POSITION THE APPLIANCE
Counter
| Max 1000 mm |
| |
400 mm | |
Min. |
|
| |
40 mm |
|
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of the screwing level of the feet. In any case, the appliance should not be inclined more than 2°.
START OF DISHWASHER
The followings should be checked before starting the dishwasher.
1.the dishwasher is level and fixed.
2.the inlet valve is opened.
3.there leakage at the connections of the conducts.
4.the wires are tightly connected.
5.the power is switched on.
6.the inlet and drain hoses are not knotted.
7.All packing materials and printings should be taken out from the dishwasher.
ATTENTION: After installation please put this manual in a safe place. The contents of this manual can be useful to users.
10_ Installing your dishwasher
|
| ||
|
|