Setting up your dishwasher
Delay a cycle for up to 24 hours in
- After setting the delay time, press the START (BAŞLAT) button, and then
10 Delay Start
close the door to start the cycle.
-If you want to change the delay time once the dishwasher has started, press the Reset (Sıfırla) button and turn off the dishwasher. Then, turn on the dishwasher again and select a new cycle with a new delay setting.
To start a cycle, press the START (BAŞLAT) button before closing the door.
*Reset (Sıfırla) : To cancel a currently running cycle and drain the dishwasher,
11Start (Başlat) press and hold the START (BAŞLAT) button for three (3) seconds.
Once the dishwasher is reset, select a cycle and option, and then press
START (BAŞLAT) to restart the dishwasher.
You can select options (Self Clean, Upper, Lower, Speed Booster, Sanitize, Dry+, Delay Start) before starting a cycle. If you change the cycle after selecting an option, the original cycle is reset.
To prevent the touchpad from losing response sensitivity, follow these instructions:
•Touch the center of each keypad using one fi nger. Do not push.
•Clean the touch control’s surface regularly with a soft, damp cloth.
•Be careful not to touch more than one touch key pad at a time, except as directed.
