Installing your dishwasher

STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL REQUIREMENTS

• The water supply line pressure must be between 0.05-0.8 MPa.

CAUTION • Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.

•Do not supply hot water. Otherwise, the product may malfunction.

• Use a rated power of 220-240 V~, 50 Hz.

WARNING • Install the product while the power cord is unplugged.

•Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish washer is 11 A.)

•When powering the dishwasher, ensure that your power supply has:

-An 220-240 V~, 50 Hz fuse or circuit breaker.

-An individual branch circuit serving your dishwasher.

•After the installation, check if the power cord is not bent or damaged.

•Ensure that the water supply valve is turned off before connecting the water supply line to the dishwasher.

•Seal the water supply line connections using tefl on tape or sealing compound to stop any water leakage.

12_ Installing your dishwasher

BU-Install_DD68-00157A-08_EN.indd 12

2017-02-08 ￿￿ 1:25:25