![](/images/new-backgrounds/1248092/24809263x1.webp)
Troubleshooting and information codes
PROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
| An inappropriate programme | Select a programme according to the soil level | |
| was been selected. | of the dishes as directed in this manual. | |
|
|
| |
| The fi lter is contaminated or not | Clean the fi lter and make sure the fi lters are | |
| correctly fasten. | fi tted properly. | |
|
|
| |
| No dishwasher detergent or not | Use an automatic dishwasher detergent or | |
Has food particles | enough detergent is being used. | use more detergent. | |
The pressure of the supplied | The water supply pressure must be between | ||
remaining on the | |||
water is low. | 0.05 MPa and 0.8 MPa. | ||
dishes. | |||
|
| ||
Spray arm jets are clogged. | Clean the spray arms. | ||
| |||
|
|
| |
| The dishes are improperly | Rearrange the dishes so they have good | |
| water access and do not interfere with spray | ||
| loaded. | ||
| arm and dispenser operation. | ||
|
| ||
|
|
| |
| The water is too hard. | Check salt refi ll indicator and refi ll dishwasher | |
| salt. | ||
|
| ||
|
|
| |
| There is no rinse aid in the | Check the dispenser and add rinse aid. | |
| dispenser or not enough rinse | ||
| Check rinse aid setting. | ||
| aid was used. | ||
|
| ||
|
|
| |
Does not dry dishes | Multi taps were used without | Select the Dry+ function or use rinse aid. | |
selecting the Dry+ function. | |||
| |||
well. |
|
| |
Glasses and cups with concave | After fi nishing the cycle, empty the lower rack | ||
| |||
| bottoms hold water. This water | fi rst and then the upper, this will avoid water | |
| may spill onto other items when | dripping from the upper rack onto the dishes | |
| you are unloading. | in the lower rack. | |
|
|
| |
| The dishwasher beeps when the |
| |
| dispenser cover is opened and | This is a normal operation. | |
| during the initial stage of draining | ||
|
| ||
Is too noisy. | the pump operation. |
| |
|
| ||
The dishwasher is not level. | Ensure that the dishwasher is level. | ||
| |||
|
|
| |
| There is a ‘chopping’ sound |
| |
| because an arm is bumping | Rearrange the dishes. | |
| against the dishes. |
| |
|
|
| |
Leaves a yellow or | This can occurs from coffee and |
| |
brown fi lm on cups or | Use programme with higher temperature. | ||
tea soils. | |||
dishes |
| ||
|
| ||
|
|
| |
Does not have any | The power cord is not | Connect the power cord. | |
indicators lit. | connected. | ||
| |||
|
|
| |
Does not have | The arms are clogged with food |
| |
smoothly rotating | Clean the arms. | ||
particles. | |||
arms. |
| ||
|
| ||
|
|
| |
Leaves a white |
| Check the salt fi ll indicator and softener | |
coating on cutlery | Hard water was used. | setting is correct according to the water | |
or crockery after | hardness of your area. | ||
| |||
cleaning. |
| Check salt reservoir cap is correctly fi tted. | |
|
|
|