Samsung EC-A502ZBBA/E1 Specification, Use a USB cable with the correct specification, Manager

FAQ

Please check the following if the USB connection malfunctions.

[Case 1]	The camera power is off.
	Turn the camera power on.
[Case 2]	USB Driver is not installed correctly.
	Install the USB Driver correctly. Refer to page 104.
[Case 3]	The USB cable is not connected or you are using a cable with an incorrect
	specification.
	Use a USB cable with the correct specification.
[Case 4]	The camera is not recognized by your PC.
	Sometimes, the camera may appear under [Unknown Devices] in Device
	Manager.
	Install the camera driver correctly.
	Turn off the camera, remove the USB cable, plug in the USB cable again, and
	then turn on the camera.
[Case 5]	There is an unexpected error during file transfer
	Turn the camera power off and on again. Transfer the file again.

124