[ Selecting the 10SEC self-timer ]

Self-timer( ) / Right button

Selecting the self-timer

1.Rotate the MODE DIAL to select a recording mode other than Voice Recording mode.

2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor.

A 10 second, 2 second or Double self-timer icon appears on the LCD monitor. In Movie Clip mode, only the 10-second self-timer will work.

10SEC self-timer( ) :

Pressing the shutter button will allow an interval of 10 seconds before the image is taken.

2SEC self-timer( ) :

Pressing the shutter button will allow an interval of 2 seconds before the image is taken.

Double self-timer (

) :

A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. When using the flash, the 2-second self-timer may be delayed

for longer than 2 seconds depending on the flash charge time.

3.When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.

INFORMATION

The default is OFF.

When taking a picture using the self-timer, the self-timer lamp works as follows:

10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the first 7 seconds. It blinks at 0.5 second intervals for the remaining 3 seconds.

2 second self-timer setting : The self-timer lamp blinks at 0.5 second intervals for 2 seconds.

If you operate the Power button, Mode dial and Self-timer button during the self-timer operation, the self-timer function is cancelled.

Use a tripod to prevent the camera from shaking.

29

Page 29
Image 29
Samsung EC-D301ZSBA/E1 manual Self-timer / Right button, 2SEC self-timer