Samsung EC-D301ZSBA/E1 Selecting Video out type, Connecting to an external monitor, Yellow Video

Selecting Video out type

The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

Setting the Video Out Type

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [VIDEO] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

-[VIDEO] sub menu : NTSC, PAL

5.Press the menu button twice and the menu will disappear.

Connecting to an external monitor

In RECORDING/ PLAY mode, you can view the stored still images or movie clips by connecting the camera to an external monitor via the VIDEO cable. When the camera is connected to an external monitor, the LCD monitor will be turned off automatically.

SETUP

IMPRINT

BEEP NTSC

VIDEO PAL

BACK: SET:OK

		Yellow - Video
INFORMATION
NTSC	: U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL	: Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,

Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.

When using a TV as an external monitor, you will need to select the external or AV channel of the TV.

There will be a digital noise on the external monitor, but it is not a malfunction.

If the image is not in the centre of the screen, use the TV controls to centre it.

When the camera is connected to an external monitor, the menu will be visible on the external monitor and the menu functions are the same as those indicated on the LCD monitor.

63