Samsung EC-D301ZSBA/E1 manual Latest, Setting up the Mycam menu

Latest

The most recent changes made to the camera setting values since [LATEST] has been set to [YES] will be maintained. The changed setting values are maintained even after the camera is turned off and then back on.

Saving Camera Functions
1. In any mode other than Voice Recording mode or
MySET mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP]		SETUP
menu tab.
	Q.VIEW
3. Select the [LATEST] menu by pressing the UP/ DOWN
	RESET		NO
button and press the RIGHT button.	LATEST		YES
4. Select a desired sub menu by pressing the UP/ DOWN	BACK:			SET:OK
button and press the OK button.
- If [NO] is selected : The changed camera functions
will not be saved.

-If [YES] is selected : The changed camera functions will be saved.

5.Press the menu button twice and the menu will disappear.

The menus to which the changed values are saved regardless of the Latest function are as follows: SIZE, QUALITY, PHOTO FRAME, all SETUP menus, and all MyCAM menus.

When the [LATEST] is [ON], the menus to which the changed values are always saved are as follows: FLASH, METERING, EXPOSURE COMPENSATION, SHARPNESS, EFFECT, and WHITE BALANCE.

Setting up the MYCAM menu

You can set up a start up sound or start up image. Every camera working mode (with the exception of Voice recording mode) has the MYCAM menu.

Menu tab	Main menu		Sub menu		Page
	S.BEEP	ON		OFF	P.66
	S.IMAGE	OFF		IMAGE1	P.66
		IMAGE2

65