PictBridge : Reset

Important notes

Initialises user-changed configurations.

1.Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button.

2.Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.

Date

:Auto

File Name

:Auto

 

 

Reset

No

 

 

Yes

 

 

No

 

 

 

 

Back

Set

Be sure to observe the following precautions!

This unit contains precision electronic components. Do not use or

store this unit in the following locations.

- Areas exposed to severe changes in temperature and humidity.

- Areas exposed to dust and dirt.

- Areas exposed to direct sunlight or the inside of a vehicle in hot

weather.

- Environments where there is high magnetism or excessive vibration.

If [Yes] is selected

: All print and image settings will be reset.

If [No] is selected: Settings will not be reset.

ÄDefault print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer.

- Areas with high explosives or highly flammable materials.

Do not leave this camera in places subject to dust, chemicals (like

naphthalene and mothballs), high temperature and high humidity.

Keep this camera with silica gel in a hermetically sealed box when

not planning to use the camera for a long period of time

Sand can be particularly troublesome to cameras.

- Do not let sand get inside the camera when using it on beaches,

coastal dunes, or other areas where there is lots of sand.

- Doing so may result in failure or may permanently render the

camera unusable.
Handling the camera

- Never drop the camera or subject it to severe shocks or vibrations.

- Protect the large size LCD monitor from an impact. When this

camera is not used, keep it in the camera case.

- Avoid obstructing the lens or the flash when you capture an image.

- This camera is not waterproof.

To avoid dangerous electrical shocks, never hold or operate the

camera with wet hands.

- If you use this camera in wet places, such as beach or pool,

do not let water or sand get inside the camera. Doing so may

result in failure or may permanently damage the unit.

73