Samsung EC-I85ZZBBA/AS System requirements About the software, For Windows, USB port CD-ROM drive

System requirements

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run.

For Windows

PC with processor better than Pentium II 450MHz

(Pentium 800MHz recommended)

*Samsung Converter

PC with processor better than Pentium 500MHz (Pentium IV recommended)

Windows 98SE / 2000 / ME / XP/Vista

*Samsung Converter Windows 2000 or later recommended

Minimum 128MB RAM (Over 512MB recommended)

USB port

CD-ROM drive

1024×768 pixels, 16-bit color display compatible monitor

(24-bit color display recommended) Microsoft DirectX 9.0 or later

For Macintosh

Power Mac G3 or later, or Intel Processor

Mac OS 10.1 ~ 10.4

Minimum 256MB RAM

110MB of available hard-disk space

USB port

CD-ROM drive

MPlayer (For movie clip)

Before connecting the camera to the PC, you

should fi rst install the camera driver.

Camera driver : This enables images to transfer between the camera and PC.

This camera uses the USB Storage Driver as the camera driver. You can use the camera as a USB card reader. After installing the driver and connecting this camera to the PC, you can fi nd [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only for Windows. A USB Driver for MAC is not included with the Application CD. You can use the camera with Mac OS 10.1~10.4.

XviD codec: This makes movie clips (MPEG-4) recorded with this camera play back on a PC.

To play back a movie clip recorded with this camera, you must install the XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows.

113