Samsung EC-I85ZZBBB/AS, EC-I85ZZRBA/E2 manual Focus lock, Power button, Shutter button, Recompose

Focus lock

To focus on a subject not positioned in the centre of the picture, use the focus lock function.

Using the Focus Lock

1.Ensure the subject is in the centre of the autofocus frame.

2.Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the Shutter button all the way down to avoid taking an unwanted picture.

3.With the Shutter button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the Shutter button completely to take the picture. If you release your fi nger from the Shutter button, the focus lock function will be cancelled.

	F 3.5	F 3.5
	1/45s	1/45s
01:00 PM	01:00 PM	01:00 PM
2007 / 08 / 01	2007 / 08 / 01	2007 / 08 / 01
1. The image to be	2. Press the Shutter	3. Recompose the
captured.	button halfway and	picture and fully
	focus on the subject.	depress the Shutter
		button.

026

Using the camera buttons to set the camera

The recording mode function can be set up by using the camera

buttons.

POWER button

Used for turning the camera’s power on/off. If there is no operation during the specifi ed time, the camera’s power will be turned off automatically to save battery life.

Refer to page 60 for more information about the auto power off function.

Shutter button

Used for taking an image or recording voice in the Recording mode.

In Movie clip mode

Pressing the Shutter button down fully

starts the process for recording a movie clip. Press the Shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the Shutter button again.

In Still image mode

Pressing the Shutter button down halfway activates the autofocus and checks the condition of the fl ash. Pressing the Shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has fi nished storing the image data.