Setting up the recording function using the camera buttons
Exposure compensation
This camera automatically adjusts the exposure according to the ambient lighting conditions.
However, you can adjust exposure value by using [EV] menu.Compensating Exposure1. Press the Fn button, and then use the UP |
|
and DOWN buttons to select the exposure |
|
compensation icon (). |
|
The exposure compensation menu bar will |
|
appear as shown. | EV |
2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor.
3.Press the Fn button again. The value you set will be saved and the Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator () will be displayed on the bottom of the LCD monitor.
A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
Movie frame stabiliser
This function helps stabilize images captured during movie recording. You can select this menu only in the MOVIE mode.
[Off] () : Movie frame stabilizer function is disabled.[On] () : This function helps stabilize |
|
images captured during movie | STABILIZER |
recording. | Off |
|
43