Setting up the recording function using the camera buttons
2. Press the
3. When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.
[Selecting the 10 SEC
Icon | Mode | Description |
|
| |
10SEC | ||
|
| |
|
|
|
| 2SEC | Pressing the shutter button will allow an interval |
of 2 seconds before the image is taken. | ||
|
| A picture will be taken after about 10 seconds |
| Double | and 2 seconds later a second picture will be |
taken. When using the flash, the | ||
|
| |
|
| seconds depending on the flash charging time. |
|
|
|
|
| The camera detects the subject’s movement 6 |
Motion Timer | seconds after pressing the Shutter button, and | |
|
| the picture is taken when the movement stops. |
|
|
|
Motion | Icon & | |
Pressing the Shutter button after | Blink (1 second interval) | |
setting the Motion Timer | ||
| ||
Detecting the subject’s movement | Blink (0.25 second interval) | |
No movement is detected | Turn on and the image is taken after | |
2 seconds | ||
| ||
|
|
The Motion Timer flows are as followings. (Movie mode excluded) Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.)*1 Starting the detection (Swing your hands fully)*2 Stopping the detection (Do not move)
Taking an image (after 2 sec.)*1. The camera detects the subject’s movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.
*2. Move your body or hands fully.In the following cases, the Motion Timer may not operate.The focus distance is over 3m.The exposure is too bright or dark In backlight conditions. The movement is insignificantThe movement is detected beyond thecenter part (50%) of the sensor where the movement is recognized.
If the camera doesn`t sense any movement for 30 seconds, or the camera doesn’t sense stillness after sensing movement.
33