![](/images/backgrounds/351185/351185-076x1.png)
DISPLAY ()
Quick view
If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
SETTINGS ()
Formatting a memory
This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.
- Sub menus |
|
[Off] | : The quick view function |
| can’t be activated. |
[0.5, 1, 3 sec] : The captured image is briefly displayed during the selected time.
|
|
|
|
DISPLAY |
| ||
Language |
| ||
Date & Time |
| ||
Start Image | Off | ||
LCD Bright | 0.5sec | ||
Quick View | 1sec | ||
LCD Save | 3sec | ||
|
| Back | Set |
|
|
|
|
[No] : The memory will not be formatted.
[Yes] : A window is displayed to confirm the selection. Select the [Yes] menu. A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.
SETTINGS
FormatNo
ResetYes
File
Imprint
Power Off
Video Out
Back | Set |
LCD save
If you set the [LCD save] to On and the camera isn’t operated during the specified time, the LCD monitor will be turned off automatically.
-Sub menus
[Off] : The LCD monitor will not be turned off.[On] : If the camera isn’t operated during the specified time (about 30 SEC.), the camera power will be idle (Camera status lamp:Blinking) automatically.
DISPLAY
Language
Date & Time
Start Image
LCD Bright
Quick View | Off |
LCD Save | On |
Back | Set |
-A memory card that has a file this camera can’t recognise or one that has been taken from another camera.
-Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message.
75