Samsung EC-L310WBBA/E1 manual Fn button ISO, Fn button Drive mode, AEB Auto Exposure Bracketing

Fn button: Drive mode

Fn button: ISO

You can select continuous shot, and
AEB (Auto Exposure Bracketing).
	Single
Icon Drive Mode	Description

You can select the ISO sensitivity when taking pictures.

The speed or specific light-sensitivity of a camera is rated by ISO numbers.

Auto

Single	Take one picture only.
Continuous	Images will be taken continuously until the Shutter
	button is released.

	Take three pictures in a series in different
AEB	exposures: standard exposure (0.0EV), short
	exposure (-1/3EV) and over exposure (+1/3EV).
	This takes 6 shots per second for up to 5 seconds,
Motion	when the Shutter is pressed and held down. After
	completing the continuous shooting, images are
Capture
	saved automatically. The maximum number of
	shots is 30 and the image size is fixed as VGA.

High resolution and picture quality increases file saving time, which increases stand-by time.

If the [Continuous], [Motion Capture] or [AEB] sub menu is selected, the flash will be off automatically.

If less than 30 pictures are available in the memory, the motion capture is not available.

It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.

In [Manual] mode, [AEB] does not operate.

When [Smile Shot] or [Blink Detection] is set, [Continuous], [Motion Capture] and [AEB] functions are not available.

Icon	ISO Mode	Description
		The camera’s sensitivity is automatically changed
	Auto	by variables such as lighting value or subject
		brightness.
		You use a faster (shorter) shutter speed while the
	ISO 80	same amount of light is present, by increasing the ISO
	ISO 100	sensitivity amount of light is present, by increasing the
	ISO 200	ISO sensitivity. However, the image may be saturated
		in high luminance. The higher the ISO value, the higher
	ISO 400
		the camera’s sensitivity to light and therefore the
	ISO 800
		greater its capacity to take pictures in dark conditions.
	ISO 1600
		However, the noise level in the image will increase as
	ISO 3200	the ISO value increases, making the image appear
		coarse.

When the ISO 3200 menu is selected, the image size is fixed to under 3M. When [Motion Capture] is set, ISO speed will be set to Auto.

039