FAQ
OWhen a codec for playing back the movie clip isn’t installed, or isn’t compatible.
¬ Install the codec as listed below.
[Installing codec for Windows ]
1)Insert the CD provided with the camera.
2)Run the Windows Explorer and select
and click the
ÚThe XviD codec is distributed according to the GNU General Public License and anyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. For more information, see the License documents (http://www.gnu.org/copyleft/gpl.html).
[Installing codec for Mac OS]
1)Visit the following site for downloading the codec. (http://www.3ivx.com/download/macos.html)
2)Click [Free Downlaod] then download windows appears.
3)Check the version of Mac OS and click the [Download] button to download the 3ivx codec.
4)Run the downloaded file and the codec for playing back the movie clip will be installed.
ÚWhen the CPU is Intel Processor, run the movie with the MPlayer.
OWhen the DirectX 9.0 or later is not installed
¬Install the DirectX 9.0 or later.
1)Insert the CD provided with the camera.
2)Run the windows explorer and select the
QIf a PC (Windows 98) repeatedly stops responding while the camera and PC are connected.
¬If a PC (Windows 98) is turned on for a long time and the camera has to be repeatedly
Q If a PC connected with the camera stops responding while Windows is starting.
¬In this case, disconnect the PC and the camera and Windows will start. If the problem happens repeatedly, set the Legacy USB Support to disable and
Q If the movie clip can’t be deleted, or if a removable disk can’t be extracted or if an error message displays during the file transfer.
¬If you install only the Digimax Master, the problems mentioned above occasionally happen.
-Close the Digimax Master program by clicking the Digimax Master icon on the Taskbar.
-Install all the application programs included in the software CD.
94
